# Customizing The Keyboard; The Prg/modes/keys Sub-menu - HP F2226A - 48GII Graphic Calculator User Manual

Graphing calculator.

## Customizing the keyboard

Each key in the keyboard can be identified by two numbers representing their
row and column. For example, the VAR key (J) is located in row 3 of
column 1, and will be referred to as key 31. Now, since each key has up to
ten functions associated with it, each function is specified by decimal digits
between 0 and 1, according to the following specifications:
.0 or 1, unshifted key
.2, key combined with „
.3, key combined with ‚
.4, key combined with ~
.5, key combined with ~„
.6, key combined with ~‚
Thus, the VAR function will be referred to as key 31.0 or 31.1, while the
UPDIR function will be key 31.2, the COPY function will be key 31.3, the
upper-case J is key 31.4, and lower case j is key 31.5. (Key 31.6 is not
defined). In general, a key will be described by the arrangement XY.Z, where
X = row number, Y = column number, Z = shifting.
We can combine a given key with the USER key (left-shift associated with the
~ key, or „Ì) to create a customized key action. In principle, the
entire keyboard can be re-defined to perform a number of customized
operations.

Commands useful in customizing the keyboard are provided by the KEYS
to SOFT menu, the sequence „ °L @) M ODES @) K EYS
produces the following KEYS soft menu:
The functions available are:
0.01 or 0.11, not applicable
.21, key simultaneous with „
.31, key simultaneous with ‚
.41, key combined with ~
.51, ~ key simultaneous with „
.61, ~ key simultaneous with ‚
Page 20-5