# HP F2226A - 48GII Graphic Calculator User Manual Page 403

Graphing calculator.

{ '(X-1)^2+(Y-2)^2=3' , 'X^2/4+Y^2/3=1' }
into the variable EQ.
These equations we recognize as those of a circle centered at (1,2) with
radius √3, and of an ellipse centered at (0,0) with semi-axis lengths a = 2 and
b = √3.
Enter the PLOT environment, by pressing „ô, simultaneously if in
RPN mode, and select Conic as the TYPE. The list of equations will be
listed in the EQ field.
Make sure that the independent variable (Indep) is set to 'X' and the
dependent variable (Depnd) to 'Y'.
Enter
the
PLOT
simultaneously if in RPN mode.
Change
the
range
3\@@@OK@@@3@@@OK@@@. Also, change the V-VIEW range to -1.5 to 2 by
using 1.5\@@@OK@@@ 2@@@OK@@@.
Change the Indep Low: and High: fields to Default by using L @RESET
while each of those fields is highlighted.
after pressing @RESET.
Plot the graph: @ERASE @DRAW.
Note: The
and
H-View
of the two curves. There is no general rule to select those ranges, except
based on what we know about the curves. For example, for the equations
shown above, we know that the circle will extend from -3+1 = -2 to 3+1 = 4
in x, and from -3+2=-1 to 3+2=5 in y. In addition, the ellipse, which is
WINDOW
environment,
for
H-VIEW
to
Press @@@OK@@@ to complete the resetting of values.
ranges were selected to show the intersection
V-View
pressing „ò,
by
-3
to
3,
by
Select the option Reset value
Page 12-22
using