HP F2226A - 48GII Graphic Calculator User Manual Page 396

Graphing calculator.

Advertisement

Use @MOVE° and @MOVE³ to move the selected equation one location up or
down, respectively.
Use @CLEAR if you want to clear all the equations currently active in the
PLOT – FUNCTION window.
you want to clear all the functions before erasing all of them. Select YES,
and press @@@OK@@@ to proceed with clearing all functions. Select NO, and
press @@@OK@@@ to de-activate the option CLEAR.
Press @@@OK@@@ when done to return to normal calculator display.
„ò, simultaneously if in RPN mode: Access to the PLOT WINDOW
screen.
Settings:
Enter lower and upper limits for horizontal view (H-View) and vertical
view (V-View) ranges in the plot window. Or,
Enter lower and upper limits for horizontal view (H-View), and press @AUTO,
while the cursor is in one of the V-View fields, to generate the vertical
view (V-View) range automatically. Or,
Enter lower and upper limits for vertical view (V-View), and press @AUTO,
while the cursor is in one of the H-View fields, to generate the horizontal
view (H-View) range automatically.
The calculator will use the horizontal view (H-View) range to generate
data values for the graph, unless you change the options
(Indep)
, and (Indep)
High
minimum, maximum, and increment values of the independent variable to
be used in the plot. If the option Default is listed in the fields
(Indep)
, and (Indep)
High
maximum values determined by
A check on
_Pixels
increments (
) are given in pixels rather than in plot coordinates.
Step:
Soft menu key options:
Use @EDIT to edit any entry in the window.
Use @AUTO as explained in Settings, above.
The calculator will verify whether or not
. These values determine, respectively, the
Step
, the calculator will use the minimum and
Step
.
H-View
means that the values of the independent variable
,
Indep Low
,
Indep Low
Page 12-15

Advertisement

Table of Contents

48gii49g+

Symbols: 0