Position your cursor where you want the constant inserted.
Press [ 2nd ] [ CONST ] to display the physics constants menu.
Scroll through the menu until the constant you want is underlined.
Multi-statement functions are formed by connecting a number of individual
statements for sequential execution. You can use multi-statements in manual
calculations and in the program calculations.
When execution reaches the end of a statement that is followed by the
display result command symbol (
that point appears on the display. You can resume execution by pressing
]. See Example 35.
Chapter 5 : Graphs
Built-in Function Graphs
You can produce graphs of the following functions: sin, cos, tan, sin
, sinh, cosh, tanh, sinh
When you generate a built-in graph, any previously generated graph is
cleared. The display range is automatically set to the optimum. See Example
You can also specify your own single-variable functions to graph (for
example, y = x
must set the display range when creating a user generated graph.
Press the [ Range ] key to access the
range parameters for each axis:
minimum value, maximum value, and
scale (that is, the distance between
the tick marks along an axis).
]. (See Example 34.)
– 6x – 8). Unlike built-in functions (see above), you
), execution stops and the result up to
, log, ln, 10