Table of Contents
Advertisement
SECTION 6: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Schedule
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Every 8 Hours of Operation:
•
Clean the mill of all debris.
•
Check belt for proper tension, damage, or
wear (refer to Replacing Belts on Page 52
& 53 for detailed instructions).
•
Lubricate as required (refer to Lubrication
beginning on Page 42 for detailed instruc-
tions).
•
Check mill base for accumulated coolant and
debris.
•
Check for damaged or worn electrical con-
nections, wires, and switch.
•
Check for any other condition that would
hamper the safe and efficient operation of
your mill.
Model G9901/G9902/G9903 Milling Machine
Every 40 Hours of Operation:
•
Lubricate as required (refer to Lubrication
beginning on Page 42 for detailed instruc-
tions).
Every 1000 Hours of Operation:
•
Lubricate as required.
Cleaning and
Protecting
Use a brush and shop vacuum to remove chips
and debris from the mill. Never blow the mill off
with compressed air, as this will force metal chips
deep into the mechanisms.
Remove any rust build-up from unpainted cast iron
surfaces or your mill, and treat them with regular
applications of products like G96
®
SLIPIT
, or Boeshield T-9
beginning on Page 39).
®
Gun Treatment,
®
(see ACCESSORIES
-41-
Advertisement
Table of Contents
