Origin Effects DELUXE55 TWEED RECREATION Owner's Manual page 8

DELUXE55 Tweed Recreation
DELUXE55 in Your Rig (continued)
Replacing an Amp Block in a Modeller:
Like the example above, the DELUXE55 takes the place of an amp in your signal chain. With a modeller, you
will need to connect the DELUXE55 in the modeller's FX Loop. When building a preset, use the FX Loop block
in place of an amp block. Place the FX Loop block after compression and drive and before time-based e ects.
Set the POST EQ to FLAT (see page 11 for details).
DELUXE55 with a Power Amp and Cab (or Amp FX Return):
Just like the previous two rigs, the DELUXE55 is being used as the main "amp sound". Place after compression,
overdrive etc. and before time-based e ects. Connect the output from your last pedal to your power amp's
input (or amp's FX Return) and set the POST EQ to FLAT (see page 11 for details).
8