Rfid Electrical Considerations; Operating Time; Charge Time - Datalogic Falcon 5500 Addendum

RFID Electrical Considerations

Operating time

Under normal operating conditions, the RFID battery will last longer than the
Falcon battery. Extended continuous operation may result in the RFID battery
discharging before the Falcon battery. When using "paint" mode, the battery
will last approximately 3 hours.
If the RFID unit fails to operate or produces error messages on the Falcon
screen, it could be an indication that the RFID battery is becoming depleted.
The red indicator light will begin to flash when the battery gets low. See
LEDs/Indicators on page 6

Charge time

You must charge the Falcon in the RFID-compatible dock prior to first use. The
initial charge time is approximately 24 hours. See "Charging the Batteries" in the
Falcon 4400 Series Quick Reference Guide (QRG) for more information.
CAUTION
After the initial charge, normal charge time is approximately 4 hours. The
time depends on how much charge is in the battery when charging begins.
Addendum
RFID Electrical Considerations
for more information.
5