RFID Settings
1. Go to
2. Select
3. Choose one of the available
Report Settings
In the RFID Decoding Properties, do the
following to view or modify Report Set-
tings:
1. Under
2.
3. Select the checkboxes for
At least one of the tag types must be enabled.
Addendum
Start > Settings > Control
. Double-tap the
Panel
icon.
Configure > RFID
options.
Decoding Properties
Configure > RFID > Report Settings.
controls how often
Report Frequency
RFID tag data is reported to an
application. When set to a specific
number of tags, data is reported
when at least that many new tags
have been read. When set to Infi-
nite, data is only reported when a
painting operation is complete.
to enable/disable the device to read each class of RFID
Class 1 Gen 2 Tags
tags. Improved performance can be achieved by enabling only the class
of tags which will be used, if known.
Decoding
.
, go to
Read Class 0 Tags, Read Class 1 Tags
Configuration Settings
or
Read
9