Configuration Settings; Audio - Datalogic Falcon 5500 Addendum

Configuration Settings

Configuration Settings
See
different usages. Refer to the Falcon 4400 Series PRG for information about
setting other configuration items.

Audio

1. Go to
2. Select
3. Choose from the following
•
•
Other options for Beep Type are
8
Configuration Examples on page 12
Start > Settings > Control
. Double-tap the
Panel
icon.
Configure > General > Audio
options:
Move the slider to raise or
Volume:
lower the audio volume.
Beep Type
— selects the tone
Good Read
(pitch), duration and number of
beeps which are played at the end of a successful RFID painting oper-
ation.
— selects the pitch and duration of the beep which is
RFID Tag Read
played each time one or more tags are read. It can also be disabled, so
that only the green LED turns on when new tags are read.
for samples of optimized settings for
Decoding
.
or
RFID Tag Write
®
Falcon 5500 RFID Mobile Hybrid Computer
.
RFID Failed Write