Grizzly G0609 Owner's Manual page 31

G9256—6" Dial Caliper
G9257—8" Dial Caliper
G9258—12" Dial Caliper
Required for jointing, planing, or sanding to criti-
cal tolerances. These traditional dial calipers are
accurate to 0.001" and can measure outside
surfaces, inside surfaces, and heights/depths.
Features stainless steel, shock resistant construc-
tion and a dust proof display. An absolute treat for
the perfectionist!
Figure 34. Grizzly
H9247—Dispoz-A-Blade
H9248—Replacement Dispoz-A-Blade
Knives
Install a Dispoz-A-Blade
new jointer and save up to 70% on knife replace-
ments for the life of your jointer. Each knife insert
is double-edged, so you get two knives in one,
and is indexed so that all knife inserts can be
installed at the same height in just minutes. Yes,
that means you can throw away the knife jig!
Figure 35. Dispoz-A-Blade
-28-
Dial Calipers.
®
System
®
HSS
®
Knife system in your
®
Holder and Knife.
®
H9246—12" HSS Replacement Jointer Knives
(Set of 4)
H1411—PowerHands
™
This safety push stick features interchangeable
traction treads; one for flat stock, and one for
pressing against table and fence. It also has a
spring loaded push-pin for full workpiece contact.
Made in the USA.
Figure 36. H1411 PowerHands
G9643—8" Precision Straightedge
G9644—12" Precision Straightedge
H2675—16" Precision Straightedge
Ideal for aligning your outfeed bed to the cutterhead
and calibrating your depth scale. These grade
00 heavy-duty stainless steel straightedges are
manufactured to DIN874 standards for profes-
sional results in set-up and inspection work.
Figure 37. Straightedges.
G0609 12" Parallelogram Jointer
Safety Stick
Safety Stick.
™