Operation - Microcom 900M Operating Manual

OPERATION

Talk - Use the TALK button to enable or disable talk for the device. This button changes with a
l
single, short press. "TK" appears on the LCD when enabled.
For full-duplex users, use a single, short press to toggle talk on and off.
l
For Shared Talk users ("Sh"), press and hold while talking to enable it for the device. (Only one
l
Shared Talk user can talk at a time.)
Volume Up and Down - Use the + and − buttons to control the volume. "VOL" and a numerical
l
value from 00–09 appear on the LCD when volume is adjusted.
LED Modes -
l
Left-hand Talk/State LED is blue and double blinks when logged in and single blinks when
l
logged out.
Right-hand Charging LED is red when battery is low and also red when charging in progress.
l
LED turns off when charging is complete.
Operating Multiple MicroCom Systems in One Location
Each separate MicroCom system should use the same Group for all beltpacks in that system. Pliant
recommends that systems operating in proximity to one another set their Groups to be at least ten (10)
values apart. For example, if one system is using Group 03, another system nearby should use Group
13.
Operation - 7