Beltpack Menu Settings - Microcom 900M Operating Manual

BELTPACK MENU SETTINGS

The following settings are adjustable from the beltpack menu.
To access the menu, press and hold the MODE button for 3 seconds, until the "GRP" symbol is
blinking on the LCD. Then, short-press the MODE button the specified number of times to access the
setting you wish to change. Once you have finished your changes, press and hold MODE to save your
selection and exit the menu.
Sidetone On/Off - Sidetone allows you to hear yourself while talking. Louder environments may
l
require you to increase your sidetone.
To adjust sidetone, access the beltpack menu, then press the MODE button twice. When the
l
"S_" value is blinking on the LCD, use the VOLUME +/− buttons to select an option from S0–S5.
"S0" is off. The icon in the figure below will appear on the top right of the beltpack screen when
l
Sidetone is off. "S1" is the lowest sidetone level. "S5" is the highest.
The default sidetone setting is "S3."
l
Figure 4 Sidetone Off Icon
BeltPack Menu Settings - 8