Recommended Settings by Headset
The following table provides recommended MicroCom settings for several common headset models.
Headset Model
Headset with boom mic
Headset with lavalier mic
Use the diagram of the wiring for the beltpack's TRRS connector if you choose to connect your own
headphones. The microphone bias voltage range is 1.9V DC unloaded and 1.3V DC loaded.
Recommended Setting
Mic Sensitivity Level
C1
C3
Figure 5 TRRS Connector
Audio Output Level
UH
UH
BeltPack Menu Settings - 11
Need help?
Do you have a question about the 900M and is the answer not in the manual?