Device Specifications - Microcom 900M Operating Manual

DEVICE SPECIFICATIONS

Specification*
Radio Frequency Type
Radio Interface
Voice Codec
Tx Max Output Power
Rx Sensitivity
Voice Latency
Frequency Channels
Channel Spacing
Data Rate
Battery Type
Battery Life
Power Consumption Average
Charge Type
Frequency Response
Maximum Full Duplex Users
Dimension / Weight
Display
*Notice About Specifications: Notice about Specifications: While Pliant Technologies makes every
attempt to maintain the accuracy of the information contained in its product manuals, that information
is subject to change without notice. Performance specifications included in this manual are design-
centered specifications and are included for customer guidance and to facilitate system installation.
Actual operating performance may vary. Manufacturer reserves the right to change specifications to
reflect latest changes in technology and improvements at any time without notice.
Note: PMC-900M-AN is approved for use in Australia and New Zealand and
operates within the 915–928 MHz frequency range.
PMC-900M
ISM 902–928 MHz
ISM 900 MHz: FSK Modulation with Frequency Hopping
16 bit / 16 KHz
Rechargeable 3.7 V, 1,100 mA Li-ion fixed battery
Approx. 8 hours
10 mA at Class 1 (100 mW)
USB Micro, 5V 1–2A
98 mm (H) x 49 mm (W) x 17 mm (D) / 88 g
7-segment LCD
PMC-900M-AN
ISM 915–928 MHz
100 mW
-95 dBm
<35 ms
78 channels
2 MHz
2 Mbps
50 Hz - 7 kHz
5
Device Specifications - 12