Cleaning And Servicing - Bosch wireless PerfectRoast Information For Use

EN
5. Move the charging station near the food without exceeding
an ambient temperature of 0°C to 50°C.
Note: If you turn the food, do not remove the wireless food
probe. After turning, check that the wireless food probe is
inserted correctly in the food.
Tip: You can find more information on using the wireless food
probe in the Home Connect app.
5.4 Switching off the wireless food probe
▸ Place the wireless food probe onto the charging station and
wait 10 seconds until all the LEDs go out.
Note: If the Bluetooth
10 seconds while the wireless food probe is on the charging
station, make sure that the metal ring and the probe are
connected to the charging contacts.
6

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is
important to clean and maintain it carefully.
6.1 Cleaning the wireless food probe
ATTENTION!
Incorrect cleaning may damage the wireless food probe.
▸ Never hold the wireless food probe under cold water after
use.
Requirement: The wireless food probe has cooled down.
▸ Clean the wireless food probe by hand using a hot
detergent solution.
You can also clean the wireless food probe in the dishwasher.
6.2 Cleaning the charging station
ATTENTION!
Incorrect cleaning may damage the charging station.
▸ Never immerse the charging station in water or other
liquids.
▸ Do not use cleaning agents containing solvents or
abrasives.
▸ lean the charging station with a damp cloth.
12
_Bluetooth_Meatprobe_BO_9001868535.indd 12 _Bluetooth_Meatprobe_BO_9001868535.indd 12
LED is still flashing or lit after
®
22.03.24 08:38 22.03.24 08:38