Advertisement
Quick Links
EH0096BK
PAGE 1 OF 9
FITTING INSTRUCTIONS FOR EH0096BK EXHAUST HANGAR
BMW R1250R + R1250RS SPORT 2019-
.
THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE
.
SOME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY
.
DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT
.
PLEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS OR HAVE
FITTED BY A QUALIFIED TECHNICIAN.
PLEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF
.
MOUNTING TO THE BIKE
,
IN THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
.
THESE RUBBER WASHERS CAN BE THROWN AWAY
DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM:
WWW.RG-RACING.COM
R&G Racing
Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire GU34 3AQ.
Tel: +44 (0)1420 89007 Fax +44 (0)1420 87301
www.rg-racing.com
Email:
info@rg-racing.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for R&G EH0096BK
Summary of Contents for R&G EH0096BK
- Page 1 EH0096BK PAGE 1 OF 9 FITTING INSTRUCTIONS FOR EH0096BK EXHAUST HANGAR BMW R1250R + R1250RS SPORT 2019- THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE SOME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT...
-
Page 2: Exploded Assembly Diagram
EH0096BK PAGE 2 OF 9 TOOLS REQUIRED GENERAL TORQUE SETTINGS • TORX HEAD TOOLS (T-BAR OR SOCKETS) M4 BOLT = 8Nm • ALLEN HEAD TOOLS (T-BAR OR SOCKETS) M5 BOLT = M6 BOLT = M8 BOLT = 20Nm 0 BOLT = 40Nm... -
Page 3: Fitting Instructions
EH0096BK PAGE 3 OF 9 FITTING INSTRUCTIONS • Remove the original OEM footrest + exhaust hangar on the RHS of the bike using your torx tool. • Offer up your R&G exhaust hangar into position and place the two longer M8 button head bolts (item 2) through the two top holes. - Page 4 EH0096BK PAGE 4 OF 9 NOTICE DE MONTAGE POUR EH0096BK SUPPORT D’ECHAPPEMENT BMW R1250R + R1250RS SPORT 2019- E KIT CONTIENT LES ARTICLES EN PHOTO ET ETIQUETTES SUR LA PAGE LES PARTIES PRESENTÉES PEUVENT ETRE UNIQUEMENT REPRESENTATIVES POUR LA CLARTE DES INSTRUCTIONS E PAS ROCÉDER AU MONTAGE AVANT DE VOUS ÊTRES ASSURE QUE TOUTES LES PIECES SOIENT PRÉSENTES...
-
Page 5: Outils Requis
EH0096BK PAGE 5 OF 9 OUTILS REQUIS VALEURS DE SERRAGE • OUTILS TORX (BARRE EN T OU CLE) M4 BOULON = 8Nm • OUTILS ALLEN (BARRE EN T OU CLE) M5 BOULON = M6 BOULON = M8 BOULON = 20Nm... - Page 6 EH0096BK PAGE 6 OF 9 NOTICE DE MONTAGE • Retirez le repose-pied d'origine + le support d'échappement du coté droit de la moto, à l'aide de votre outil Torx. • Placez votre support d’échappement R&G en place et placez les deux boulons M8 (article 2) plus longs dans les deux trous supérieurs.
- Page 7 EH0096BK PAGE 7 OF 9 MONTAGEANLEITUNG FÜR EH0096BK AUSPUFFHALTERUNG BMW R1250R + R1250RS SPORT 2019- EILE SIND UNTEN ABGEBILDET UND GEKENNZEICHNET IE ABGEBILDETEN EILE DIENEN LEDIGLICH ZUR RKLÄRUNG Ü BERPRÜFEN IE ZUERST DASS ALLE EILE VORHANDEN SIND WENN SIE BEI DER...
- Page 8 EH0096BK PAGE 8 OF 9 SIE BENÖTIGEN FOLGENDES WERKZEUG ALLEM. ANZUGSDREHMOMENT M4 SCHRAUBE = 8Nm • Satz Torx-Schlüssel • Satz Inbusschlüssel M5 SCHRAUBE = M6 SCHRAUBE = M8 SCHRAUBE = 20Nm 0 SCHRAUBE = 40Nm M12 SCHRAUBE = 40Nm LIEFERUMFANG...
- Page 9 EH0096BK PAGE 9 OF 9 MONTAGEANLEITUNG • Entfernen Sie die original Fußraste und Auspuffhalterung an der rechten Seite des Motorrades mit dem Torx-Schlüssel. • Die R&G Auspuffhalterung in Position bringen und die zwei längere M8 Inbusschrauben (Artikel 2) in die zwei oberen Öffnungen einsetzen.
Need help?
Do you have a question about the EH0096BK and is the answer not in the manual?
Questions and answers