Using the CD/DVD drive
The CD/DVD drive module can read data and audio CDs, and the DVD drive
module can also read DVDs.
Inserting a CD/DVD
Component
A
B
To insert a CD/DVD:
1 Press the eject button on the CD/DVD drive, then pull the disc tray
completely open.
2 Place the CD/DVD in the tray with the label up, then press down carefully
on the disc until it snaps into place.
Important
3 Push the tray in until it is closed.
Description
Eject button
Manual eject hole. To open the tray while
power is turned off, insert a straightened
paper clip into this hole.
When you place a single-sided CD or DVD in the tray, make
sure that the label side is facing up. If the disc has two
playable sides, place the disc so that the name of the side
you want to play is facing up.
A
B
Using the CD/DVD drive
63