Table of Contents
Advertisement
Chapter : Replacing Components in Your Gateway Solo 1450
Replacing the CD or DVD drive
Tools you need to complete this task:
Screws removed during this task:
2 chrome 2.5 × 3 mm
(keyboard)
To replace the CD or DVD drive:
1
Disconnect the power cord, remove the battery, and prepare your
notebook by following the instructions in "Preparing your notebook" on
page 5.
2
Remove the keyboard cover by following the instructions in "Replacing
the keyboard cover" on page 19.
3
Remove the keyboard by following the instructions in "Replacing the
keyboard" on page 32.
42
Phillips #0 screwdriver
1 chrome 2 × 4 mm
(CD or DVD drive top)
1 black 2.5 × 4 mm
(CD or DVD drive bottom)
www.gateway.com
Scribe or non-marring tool
Advertisement
Table of Contents
