Page 1
INSTRUCTIONS FOR: SUPERMIG WELDER S U P E R M IG 2 7 0 .V 3 MODEL No: Original Language Version SUPERMIG270.V3 Issue: 2 - 10/03/10...
Page 2
SUPERMIG270.V3 MODEL No: Thank you for purchasing a Sealey welder. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY. MAkE CAREFUL NOTE OF SAFETY INSTRUCTIONS, WARNINGS AND CAUTIONS.
0.6mm and 0.8mm, and will accommodate 5-15kg wire spools. THE SUPERMIG270.V3 COMES EqUIPPED WITH: Torch Mini reel of 0.6mm wire Regulator Gas hose. Welding Current ....40-270A Spot Welding .
VEHICLE, DISCONNECT THE BATTERY OR FIT AN ELECTRONIC CIRCUIT PROTECTOR. WE STRONGLY RECOMMEND THE AS GUIDE ONLY USE OF SEALEY PROSAF/12 OR PROSAF/24 IN ORDER TO PROTECT THE VEHICLE ELECTRONICS. ENSURE THAT YOU READ, UNDERSTAND AND APPLY THE ELECTRICAL SAFETY INSTRUCTIONS IN SECTION 1.
The gas cup must also be kept clean and free from spatter. Build up of spatter inside the gas cup can cause a short circuit at the contact tip which will result in either the fuse blowing on the printed circuit card or expensive machine repairs. To keep the contact tip free from spatter, we recommend the use of Sealey anti-spatter spray (MIG/722307) available from your Sealey Dealer. 6.6.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode. Sole Uk Distributor, Sealey Group, www.sealey.co.uk...
Need help?
Do you have a question about the SUPERMIG270.V3 and is the answer not in the manual?
Questions and answers