Related Manuals for Sealey POWER WELDERS SUPERMIG185/8.V3
Summary of Contents for Sealey POWER WELDERS SUPERMIG185/8.V3
- Page 1 INSTRUCTIONS FOR Models: Supermig185/8.V3 Supermig195/9.V3 Supermig220.V4 Supermig235.V3 SUPERMIG185/8.V3, SUPERMIG195/9.V3, SUPERMIG220.V4, SUPERMIG235.V3 - 1 - 180903...
-
Page 2: Safety Instructions
RCD together with portable products that are plugged into an electrical supply not protected by an RCCB. If in doubt consult a professional electrician. You may obtain a Residual Current Device by contacting your Sealey dealer. You must also read and understand the following instructions concerning electrical safety. -
Page 3: Specifications & Introduction
SPECIFICATIONS & INTRODUCTION Model No:....SUPERMIG185/8.V3 ... SUPERMIG195/9.V3 ... .SUPERMIG220.V4... . SUPERMIG235.V3 Welding Current:. -
Page 4: Mig/Mag Welding
4.1.6. Spot Welding. Spot welding may be carried out as shown in fig.C below. It will be necessary to fit a spot welding gas cup. ( Sealey part No. 120/722150 ) (a) Overlapping metal sheets with a maximum thickness of 0.8 mm may be welded as indicated. -
Page 5: Maintenance
To keep the contact tip free from spatter, we recommend the use of Sealey anti-spatter spray (MIG/722307) available from your Sealey Dealer.
Need help?
Do you have a question about the POWER WELDERS SUPERMIG185/8.V3 and is the answer not in the manual?
Questions and answers