Related Manuals for Sealey SUPERMIG255
Summary of Contents for Sealey SUPERMIG255
- Page 1 INSTRUCTIONS FOR SUPERMIG WELDERS SUPERMIG255 MODEL No's: SUPERMIG275 © Jack Sealey Limited 2013 SUPERMIG255, SUPERMIG275 Issue: 2 (SP)- 28/08/13...
-
Page 2: Safety Instructions
SUpERMIG255, SUpERMIG275 MODEL Nos: Thank you for purchasing a Sealey Welder. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USING ThIS pRODUCT, pLEASE READ ThE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NOTE OF SAFETY INSTRUCTIONS, wARNINGS AND CAUTIONS. -
Page 3: Introduction And Specifications
All our Supermig® models are suitable for welding with CO ² , Argon or CO ² /Argon mix. Each uses a Forced Air Cooling System to slow transformer heating in order to increase duty cycle and a non-live torch to prevent the risk of accidentally striking an arc. Model Nos. SUPERMIG255 / 275 are supplied with an industrial Argon/ CO ²... -
Page 4: Unpacking And Contents
5.4.2 The quick connector at the other end of the cable will be connected to the socket identified with a clamp/minus symbol ( - ) on the lower front panel. fig.4 fig.5 Original Language Version © Jack Sealey Limited 2013 SUPERMIG255, SUPERMIG275 Issue: 2 (SP)- 28/08/13... - Page 5 Set an intermediate pressure between marks 2 and 3. Turning the knob clockwise increases the pressure. Turning the knob anti-clockwise decreases the pressure. (See fig.9). fig.14 fig.11 Original Language Version © Jack Sealey Limited 2013 SUPERMIG255, SUPERMIG275 Issue: 2 (SP)- 28/08/13...
- Page 6 CONTROLS - SUpERMIG 255 & 275 Gas types and their use. 7.1.1 Fig.16 illustrates the main panel controls for both Supermig255 & Welding mild steel with CO ² gas is appropriate for most welding tasks Supermig275. The control functions are identical for both models.
-
Page 7: Maintenance
- Replace the steel guide hose for wire feed with a Teflon guide hose. from spatter to ensure an unimpeded flow of gas. - For more information contact your local Sealey dealer . 10.7 Gas Cup (to remove the tip refer to section 6.3 and fig.15). -
Page 8: Troubleshooting
To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.