Table of Contents
Advertisement
NETGEAR 7000 Series Managed Switch Administration Guide Version 6.0
Example #4 permit
(Netgear Switch) (Config)#mac access-list extended b2
(Netgear Switch) (Config-mac-access-list)#permit 00:00:00:00:00:00 ?
<dstmac>
Enter a MAC Address.
any
Configure a a match condition for all the destination MAC
addresses in the Destination MAC Address field.
(Netgear Switch) (Config-mac-access-list)#permit 00:00:00:00:00:00 any
access-queue
Configure the Queue Id assignment attribute.
cos
Configure a match condition based on a CoS value.
<ethertypekey>
Enter one of the following keywords to specify an Ethertype
(appletalk, arp, ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast,
netbios, novell, pppo,rarp).
<0x0600-0xffff) Enter a four-digit hexadecimal number in the range of 0x0600 to
0xffff to specify a custom Ethertype value.
vlan
Configure a match condition based on a VLAN ID.
<cr>
Press Enter to execute the command.
9-8
v1.0, Jan 2007
Access Control Lists (ACLs)
Advertisement
Table of Contents
