Example 1: Create Two Lags - NETGEAR GSM7248NA Administration Manual

Example 1: Create two LAGS:

(Netgear Switch) #config
(Netgear Switch) (Config)#port-channel lag_10
(Netgear Switch) (Config)#port-channel lag_20
(Netgear Switch) (Config)#exit
Use the show port-channel all command to show the logical interface ids you will use to identify
the LAGs in subsequent commands. Assume that lag_10 is assigned id 1/1/1 and lag_20 is
assigned id 1/1/2.
(Console) #show port-channel all
Port-
Log. Channel
Intf Name
------ --------------- ------ ---- ---- ------ ------- ------ --------- ------
1/1/1 lag_10
1/1/2 lag_20
Link Aggregation
NETGEAR 7000 Series Managed Switch Administration Guide Version 6.0
Link
Adm. Trap
Link Mode Mode
Down En.
Down En.
v1.0, Jan 2007
STP
Mode Type
En. Dis. Dynamic
En. Dis. Dynamic
Mbr Port Port
Ports Speed Active
6-3