Table of Contents
Advertisement
This section describes the Traceroute feature.
Use Traceroute to discover the routes that packets take when traveling on a hop-by-hop basis to
their destination through the network.
•
Maps network routes by sending packets with small Time-to-Live (TTL) values and watches
the ICMP time-out announcements
•
Command displays all L3 devices
•
Can be used to detect issues on the network
•
Tracks up to 20 hops
•
Default UPD port used 33343 unless modified in the traceroute command
Note: You can execute Traceroute with CLI commands only—there is no Web
interface for this feature.
v1.0, Jan 2007
Chapter 14
Traceroute
14-1
Advertisement
Table of Contents
