Protocol Support - NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual

Broadband prosafe vpn firewall
Hide thumbs Also See for FVS318 - ProSafe VPN Firewall Router:
Table of Contents

Advertisement

The firewall incorporates Auto Uplink
automatically sense whether the Ethernet cable plugged into the port should have a 'normal'
connection such as to a PC or an 'uplink' connection such as to a switch or hub. That port will then
configure itself to the correct configuration. This feature also eliminates the need to worry about
crossover cables, as Auto Uplink will accommodate either type of cable to make the right
connection.

Protocol Support

The FVS318 supports the Transmission Control Protocol/Internet Protocol (TCP/IP) and Routing
Information Protocol (RIP).
further information on TCP/IP.
IP Address Sharing by NAT
The FVS318 allows several networked PCs to share an Internet account using only a single IP
address, which may be statically or dynamically assigned by your Internet service provider
(ISP). This technique, known as Network Address Translation (NAT), allows the use of an
inexpensive single-user ISP account.
Automatic Configuration of Attached PCs by DHCP
The FVS318 dynamically assigns network configuration information, including IP, gateway,
and domain name server (DNS) addresses, to attached PCs on the LAN using the Dynamic
Host Configuration Protocol (DHCP). This feature greatly simplifies configuration of PCs on
your local network.
DNS Proxy
When DHCP is enabled and no DNS addresses are specified, the firewall provides its own
address as a DNS server to the attached PCs. The firewall obtains actual DNS addresses from
the ISP during connection setup and forwards DNS requests from the LAN.
PPP over Ethernet (PPPoE)
PPP over Ethernet is a protocol for connecting remote hosts to the Internet over a DSL
connection by simulating a dial-up connection. This feature eliminates the need to run a login
program such as EnterNet or WinPOET on your PC.
PPTP login support for European ISPs, BigPond login for Telstra cable in Australia.
Dynamic DNS
Dynamic DNS services allow remote users to find your network using a domain name when
your IP address is not permanently assigned. The firewall contains a client that can connect to
many popular Dynamic DNS services to register your dynamic IP address.
Introduction
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
technology. Each LOCAL Ethernet port will
TM
Appendix B, "Networks, Routing, and Firewall Basics"
M-10146-01
provides
2-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fvs318nFvs318na - prosafe vpn firewall recertified

Table of Contents