Configuring A Sa Using Ike Aggressive Mode - NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
Table 6-1. Security Association Main Mode Configuration Fields
Field
Pre-Shared Key
Key Life
IKE Life Time
NETBIOS Enable

Configuring a SA Using IKE Aggressive Mode

Click the VPN Settings link of the Setup section of the main menu, and then click the radio button
of a VPN tunnel, and then click the Edit button and choose Aggressive Mode from the Security
Association drop-down list to display the Aggressive Mode menu shown in
Figure 6-4: IKE - VPN Settings Aggressive Mode Configuration Menu
6-6
Description
Specify the key. Any value is acceptable, provided the remote VPN endpoint has
the same value in its Pre-Shared Key field.
The default is 3600 seconds (one hour).
At the end of this time, the connection will drop, the security association will be
re-established, and the connection will be reactivated. The default is 28800
seconds (eight hours).
If you need to run Microsoft networking functions such as Network
Neighborhood, click the NETBIOS Enable check box to allow NETBIOS traffic
over the VPN tunnel.
M-10146-01
Figure 6-4.
Virtual Private Networking