The Firewall's Rear Panel - NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
These LEDs are green when lit, except for the TEST LED, which is amber.
Table 2-1: LED Descriptions
Label
POWER
TEST
INTERNET and LOCAl
100
LINK/ACT
(Link/Activity)

The Firewall's Rear Panel

The rear panel of the FVS318
Figure 2-2: FVS318 Rear Panel
Viewed from right to left, the rear panel contains the following elements:
• Ground connector.
• Factory Default Reset push button.
• Eight Local Ethernet RJ-45 ports for connecting the firewall to the local computers.
• Internet WAN Ethernet RJ-45 port for connecting the firewall to a cable or DSL modem.
• AC power adapter input.
• Power switch.
2-6
Activity Description
On Power is supplied to the firewall.
On The system is initializing.
Off The system is ready and running.
On/Blinking The port is operating at 100 Mbps.
On/Blinking The port has detected a link with a connection and is operating at
10 Mbps. Blinking indicates data transmission.
(Figure 2-2) contains the connections identified below.
M-10146-01
Introduction