Configuring Vpn Network Connection Parameters - NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual

Broadband prosafe vpn firewall
Hide thumbs Also See for FVS318 - ProSafe VPN Firewall Router:
Table of Contents

Advertisement

— Manual Keys: Does not use IKE. Rather, you manually enter all the authentication and
key parameters. You have more control over the process however the process is much
more complex and there are more opportunities for errors or configuration mismatches
between you FVS318 and the corresponding VPN endpoint gateway or client workstation.
You need to configure matching VPN settings on both VPN endpoints. The outbound VPN
settings on one end must match to the inbound VPN settings on other end, and vice versa.

Configuring VPN Network Connection Parameters

All VPN tunnels on the FVS318 VPN Firewall require configuring the same network parameters.
This section describes those parameters and how to access them.
Click the VPN Settings link of the Setup section of the main menu, click the radio button of a VPN
tunnel on the VPN Settings menu, and then click the Edit button to display the default Main Mode
menu shown in
Figure
for the Main Mode, Aggressive Mode, and Manual Keys options.
Figure 6-2: FVS318 VPN tunnel network connection configuration menu
Virtual Private Networking
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
6-2. The kinds of network connection information you provide are the same
M-10146-01
6-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fvs318nFvs318na - prosafe vpn firewall recertified

Table of Contents