The following table provides a complete listing of the listening modes available for each of the incoming audio or video formats currently available.
Shaded cells indicate that there are no available modes in that Mode Family for that specific incoming data stream.
Note: The table identifies all of the possible formats, but depending upon the Input setup and the Surround Configuration of the AV2, all of these modes may
not be available for selection .
Incoming PCM
Data Stream
PCM 32kHz
PLIIx Film, Music and Game
PLII Film, Music and Game
VS 2-SP REF and WIDE
PCM 44.1/48kHz
VS 3-SP REF and WIDE
2-channel
PCM 88.2kHz
2-channel
PLIIx Film, Music and Game
PLII Film, Music and Game
PCM 96kHz
2-channel
PCM 176.4/192kHz
2-channel
PCM 44.1/48kHz
5.1-channel
PCM 88.2kHz
PLIIx Film and Music
5.1-channel
PCM 96kHz
5.1-channel
**With PCM 5.1 audio input, one additional listening mode is available – the AUDIO STATUS menu indicates that the audio is PCM 3/2.1, the mode family is PCM MULTI, and the mode is
STANDARD, which applies only bass management and tone controls to the incoming PCM 5.1 audio.