Lock Feature; Advanced Customizing Tools - JBL AV2 User Manual

Appendix C
• Learned functions are automatically erased when a new
function is learned on the same button.
• Learned functions are retained even after a different
pre-programmed three-digit manufacterer's code is entered
and saved to the remote.
• To return to an original preprogrammed function, the learned
function must be erased.

LOCK FEATURE

The AV2 remote control has a locking feature, which prevents
unauthorized use of the remote control. When the locking feature is
active, all operations of the remote control are blocked. This feature
can be used as a "child-lock" to prevent children from having
unmonitored access to the home theater system.
To Activate the Lock Feature:
Press and hold the +10 and ENT (Enter) buttons at the same time. After
three seconds, the bottom of the touch screen will blink "LOCKED"
three times and then "LOCKED" will remain displayed. The Lock is
now active.
To Return to Normal Operation:
While the remote is in the LOCKED condition, press and hold the +10
and ENT (Enter) buttons at the same time. After three seconds, the
"LOCKED" message is replaced by the last used mode is displayed. The
Lock is now deactivated.

ADVANCED CUSTOMIZING TOOLS

Once the basic setup to your remote is complete, you can use the
advanced features to further customize your AV2 remote control. The
advanced customizing tools include:
• Backlight Options Customize the backlight feature to suit
–
your preferences.
C-6
• Touch Screen Customize the displayed text for each device
–
menu on the LCD touchscreen.
• Favorite Channels Set up your favorite channel list. Once this
–
list is set up, up to 40 favorite channels can be selected by the
press of a button all without needing to remember or type in
–
a channel number.
• Macros - Power all of your components ON or OFF at the same
time, with the press of one button.
• Remote Cloning Clone other AV2 remote control from an
–
already setup remote.
• Punch Throughs Force buttons to work for specific devices,
–
regardless of the device currently selected on the AV2 remote
control.
• Hiding and Adding Pages
touchscreen display.
Backlight Time Out:
The backlight feature lights the touchscreen area and illuminates the
buttons whenver the Light button is pressed. The amount of time the
backlight remains on before timing out can be adjusted to your
preferences. Follow the instructions below to change the back light
time-out setting.
1. On the remote control, press and hold the MAIN and ENT (Enter)
buttons at the same time. After about three seconds, "SETUP" is
displayed in the Menu name area at the top of the LCD
touchscreen. This is the Setup mode of the remote control.
NOTE: You now have 30 seconds to perform the next step while the
remote is in the Setup mode. If a button is not pressed within 30
seconds, the SETUP menu name will revert to MAIN, indicating that
the remote control is no longer in Setup mode. If this occurs, you will
need to repeat this step to re-enter the Setup mode.
2. Touch the menu page
SETUP menu.
Harman Consumer Group, Inc.
Customize the visible pages on the
–
arrow to access the second page of the