Menu Options; Menu Item Selection; Remote Control Light Button; Command Matrix - JBL AV2 User Manual

®
JBL Performance™ Series AV2 Audio/Video Processor

MENU OPTIONS

Selecting a menu option can open another menu within the menu
structure. For example, selecting SETUP from the MAIN MENU opens
the SETUP menu.
MAIN MENU
SETUP
AUDIO CONTROLS
DISPLAY SETUP
VIDEO STATUS
SPEAKER/EQ SETUP
SETUP
INPUT SETUP
SURROUND CONFIG
DOLBY CONFIG
MUTE LEVELS
POWER ON SETTINGS

MENU ITEM SELECTION

Use the remote control arrows to navigate the menu structure.
To select a menu item in an open menu:
1. Press the Menu or Select buttons to enter the Menu structure.
2. Navigate to the desired menu.
3. Press the remote control
desired menu item.
4. When the desired menu item is highlighted, press the
or Select button to select the highlighted item. If an option is
selected, another menu opens. When an adjustable parameter is
selected, the current selection will blink to indicate that it is
selected. Use the and
options for the selected parameter. When the desired parameter
option is highlighted, press the
select the option.
and arrows to highlight the
arrow
arrows to scroll through the available
arrow on the remote control to

REMOTE CONTROL LIGHT BUTTON

The remote control is fully backlit, making it very useful in low-light
conditions. Press the Light button on the right side of the remote
to backlight all of the buttons and the LCD touchscreen. To turn off
the backlight, press the Light button again. Or, ten seconds after
the last button is pressed, the backlight automatically shuts off.

COMMAND MATRIX

The Command Matrix table, starting on the next page, lists the
commands that each remote control button performs in each menu
setting.
Note: A brief description of each function is given in the table, but refer to
the Table of Contents for additional information on each function. For
additional information on using and programming the remote control,
refer to Appendix C.
Basic Operation
2-11