Casio YP-100 User Manual page 59

13
Check the message that appears on the computer screen.
When the computer finds the
one shown below for selecting the connected device.
14
Move the highlighting to the YP-100 unit to which you want to connect and then
click the [OK] button.
The computer will connect with the YP-100 and the above dialog box will close. Confirm
that the "Connection Profile" setting for the connected device information on the Wireless
Connection window shows "Manual Connection 1" (Test).
YP-100
, the display will change to a dialog box like the
If there are other YP-100 units (or XJ-S35
Data Projectors) with wireless adapters
connected in the area, all of them that are
detected will appear in the list.
59
Projection area position buttons
(Used in step 18).