Performing A Presentation Using The Yc-400 Document Camera; Yc Camera Application Function And Operation Overview; Connecting The Document Camera To The Yp-100 - Casio YP-100 User Manual

Multifunctional presentation kit

Hide thumbs Also See for YP-100:

Table of Contents

Performing a Presentation Using the

This section explains how to connect the CASIO YC-400 Multi PJ Camera System (document

camera) to the YP-100 in order to project the images of documents placed on the document

stage of the document camera. The YP-100's built-in application named YC Camera is used

to project document images.

Important!

A YC-400 document camera can be connected to the YP-100 only if the camera is

running firmware version 1.1 or higher. For information about checking the firmware

version of your YC-400 document camera, visit the CASIO website at:

http://world.casio.com/projector/download/en/yc_400_firmup/

YC Camera Application Function and Operation

Overview

YC Camera is an application built into the YP-100 that makes it possible to control the YC-

400 document camera from the YP-100. With the YC Camera application you can project the

image of documents placed on the document stage of the document camera. Connecting the

document camera to the YP-100 USB port and turning on the document camera will cause

the YC Camera application to start up automatically.

This section provides the basic steps you need to perform in order to connect the

document camera to the YP-100 and project the image of documents placed onto the

document camera's document stage.

YC-400 Document Camera

Table of Contents

Troubleshooting