Hanging the YP-100 from the Ceiling
The YP-100 can be hung from the ceiling or mounted on another secure surface for
connection to a ceiling-mounted projector.
For this type of installation, you will need to provide a mounting bracket for the YP-100
like the one shown in the illustration below.
When securing the YP-100 to the bracket, use of the screws that come with the YP-100
is recommended. When required, you can also use other screws to suit the thickness of
the bracket plate, etc.
If you prefer to use other screws for anchoring the YP-100, use the following screw type.
Screw Type: M3
Select anchor screws in accordance with the thickness of the bracket. The tip of the
anchor screws should enter the holes of the YP-100 no more than 2.5 mm.
Bracket Screws
(purchased separately)
Dimensions (mm)
5
Screw holes
97
84
φ
Recesses (4 locations):
5 mm (MIN)
110
Anchor Screws
Use the screws that
come with the YP-100
or separately purchased
screws.
Mounting Bracket
(Recommended Plate
Thickness: 1 mm)
6.5
5
22.5
20
65
5
5