Casio YP-100 User Manual page 56

4
Configure the settings on the dialog box.
In this example, we will use the following settings.
Dialog Box Item
Profile Name
SSID
Access Mode
Security Setup
WEP Key Format
WEP Key/WPA/WPA2 Pass Phrase
DHCP
IP Address
Subnet Mask
Default Gateway
Channel
For details about each of the settings on the dialog box, see "Manual Connection Setting
Reference" (page 79).
5
After configuring all of the settings you want, click the [Register] button.
6
On the confirmation dialog box that appears, click the [OK] button.
This will register your settings as a new connection profile (named "Test" here) and
return to the connection profile switching dialog box in step 1. The newly created profile
(Test) will be selected on the dialog box.
7
Repeat steps 1 through 5 for all of the other computers.
For the settings in step 4, simply change the IP address as shown below.
Computer 2: 192.168.100.10
Computer 3: 192.168.100.11
Computer 4: 192.168.100.12
Setting
Test
CASIO_DPJ
Ad Hoc
WEP
ASCII/128bit
1234567890abc
Off
192.168.100.1
255.255.255.0
0.0.0.0
Auto
56