Casio YP-100 User Manual page 68

To switch the YP-100 connection profile
1
On the YP-100 remote controller, press the [ ] key.
This will cause the connection profile menu to appear in the projection area.
2
Use the [ ] and [ ] keys to move the highlighting to the connection profile you
want to select and then press the [ENTER] key.
This displays the dialog box shown below.
3
Press the [ ] key to move the highlighting to "Yes" and then press the [ENTER]
key.
This will switch to the YP-100 connection profile you highlighted in step 2 and then
display the "Standing by for connection..." message.
The currently selected connection
profiled is highlighted.
This is the display of the connection
profile name after switching.
68