To Load Batteries; To Remove The Batteries From The Camera - Casio QV-R62 User Manual

GETTING READY

To load batteries

1.
Turn off the camera.
2.
Slide the battery
compartment cover on
the bottom of the
camera in the
direction indicated by
the arrow and then
swing it open.
3.
Load batteries as
shown in the
illustration.
4.
While pressing down
at the point indicated
by the arrow in the
illustration, slide the
battery compatment
cover closed.
IMPORTANT!
• Use only AA-size alkaline batteries (LR6), AA-size
lithium batteries (FR6), or AA-size rechargeable
nickel metal hydride batteries (type HR-3UA or HR-
3UB, page 33) to power this camera.

To remove the batteries from the camera

1.
Slide the battery
compartment cover on
the bottom of the
camera in the direction
indicated by the arrow
and then swing it open.
2.
Carefully tilt the
camera until the
batteries slide out.
• Take care to avoid
dropping the batteries.
34