Specifying Iso Sensitivity - Casio QV-R62 User Manual

OTHER RECORDING FUNCTIONS

Specifying ISO Sensitivity

You can change the ISO sensitivity setting for better
images in places where lighting is dim or when you are
using faster shutter speeds.
• ISO sensitivity is expressed in terms of values that
originally indicated the sensitivity to light for photographic
film. A larger value indicates higher sensitivity, which is
better for recording when available lighting is dim.
1.
In the REC mode, press [MENU].
2.
Select the "REC" tab, select "ISO", and then
press [ ].
3.
Use [ ] and [ ] to select the setting you
want, and then press [SET].
To get this:
Automatic sensitivity selection
Conforms to ISO 64
Conforms to ISO 125
Conforms to ISO 250
Conforms to ISO 500
Select this setting:
Auto
ISO 64
ISO 125
ISO 250
ISO 500
98
IMPORTANT!
• Under certain conditions, a high shutter speed in
combination with a high ISO sensitivity setting can
cause digital noise, which makes an image appear
rough. For clean, good-quality images, use the
lowest possible ISO sensitivity setting possible.
• Using a high ISO sensitivity setting along with the
flash to shoot a nearby subject may result in
improper illumination of the subject.
NOTE
• You can use key customization (page 104) to
configure the camera so the ISO sensitivity setting
changes whenever you press [ ] and [ ] while in the
REC mode.