Formatting Built-In Memory - Casio QV-R62 User Manual

OTHER SETTINGS

Formatting Built-in Memory

Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
• Formatting built-in memory deletes all files, including
files in the FAVORITE folder (page 126), protected
files (page 125), BESTSHOT user setups (page 85),
the startup image (page 131), and the power down
image (page 132).
1.
Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera,
remove it (page 146).
2.
In the REC mode or the PLAY mode, press
[MENU].
3.
Select the "Set Up" tab, select "Format", and
then press [ ].
4.
Use [ ] and [ ] to select "Format", and then
press [SET].
• To exit the format operation without formatting,
select "Cancel".
143