Table of Contents
Advertisement
Make backup copies of important data!
Your PV Unit employs flash memory, which makes it possible to store large
volumes of data and to recall data quickly and easily. Data is retained when power
is turned off and even when batteries go dead, but it can be corrupted or lost
entirely due to operational mistakes or malfunction. Data contents can also be
corrupted or lost due to strong electrostatic charge, strong impact, or extremes in
temperature and humidity. All of this means that you should always keep back-up
copies of important data by transferring it to a personal computer or by writing it
down somewhere.
Important Precautions
Note the following important precautions whenever using your PV Unit.
•
Never expose the PV Unit to fire.
•
Avoid temperature extremes. Do not locate the PV Unit in direct sunlight,
near a window, near a heater, etc.
•
In very low temperatures display response may slow down or fail entirely.
This condition is temporary and operation should resume under normal
temperatures.
•
Avoid areas subject to excessive moisture, dirt, and dust.
•
Avoid dropping the PV Unit and otherwise subjecting it to strong impact.
•
Never bend or twist the PV Unit.
•
Never try to take the PV Unit apart.
•
Do not use a pen, pencil, or other sharp object to touch or press the
display.
•
To clean the exterior of the PV Unit, wipe it with a soft cloth dampened
in a weak solution of a mild neutral detergent and water. Be sure to
wring out any excess moisture from the cloth before wiping off the PV
Unit. Never use benzene, thinner, or any other volatile agent to clean the
unit. Doing so can remove the figures printed on the case or otherwise
damage the case finish.
•
The contents of this manual are subject to change without notice.
•
CASIO COMPUTER CO., LTD. assumes no responsibility for any loss
or claims by third parties that may arise from the use of this product.
10
Advertisement
Table of Contents
