Protecting From Power Source Problems - Gateway MT6704 Reference Manual

2
3
4

Protecting from power source problems

During a power surge, the voltage level of electricity coming
into your notebook can increase to levels far above normal
levels and cause data loss or system damage. Protect your
notebook and peripheral devices by connecting them to a
surge protector, which absorbs voltage surges and prevents
them from reaching your notebook.
the modem connection. To protect your notebook and avoid electrical shock,
use a surge protector. If you have a telephone modem, use a surge protector
that has a modem jack. If you have a cable modem, use a surge protector that
has an antenna/cable TV jack. During an electrical storm, unplug both the surge
protector and the modem.
www.gateway.com
Connect the AC adapter to your notebook's power
connector.
Plug the power cord into a wall outlet. The battery
charge indicator turns on (see
location of the battery charge indicator). If the battery
charge indicator does not turn on, complete the
following steps until it turns on:
a
Unplug the adapter from your notebook, then plug
it back in.
b
Press F +F1 to toggle the status lights on and off.
N
When you finish using your notebook for the first time,
turn off your notebook and leave your notebook
connected to AC power until the battery charge
indicator turns blue.
Important
If the battery charge indicator does not turn blue after three
hours, contact Gateway Customer Care at the location shown on the
Customer Care label. For more information, see
information" on page
Warning
High voltages can enter your notebook through both the power cord and
"Front" on page 6
3.
for the
"Gateway contact
17