Milesight MS-N5008-UC User Manual page 151

the infrared light transmittance is highly increased. Support to set the strength of the IR to
Auto Mode or Customize to achieve the best effect.
Near view IR level: Adjust the light strength of Low-Beams LED light level from 0 to 100.
Far view IR level: Adjust the light strength of High-Beams LED light level from 0 to 100.
White LED Level: Adjust the White LED level from 0 to 100.
IR Strength Value: The current value of Low-Beams LED and High-Beams LED light value.
IR LED Level: Adjust the IR LED level from 0 to 100.
Day/Night Switch Refocus: With this option enabled, the camera will refocus when
switching between day mode and night mode.
Outdoor/Indoor Mode: Set Outdoor/Indoor mode for the channel.
Day to Night Sensitivity: Set the Sensitivity to trigger Night Mode.
Night to Day Sensitivity: Set the Sensitivity to trigger Day Mode.
Day to Night Value: Set the Minimum illumination intensity to trigger Night Mode.
Night to Day Value: Set the Maximum illumination intensity to trigger Day Mode.
IR Light Sensor Value: Shows the current value of IR light sensor.
Corridor Mode: Set corridor mode.
Image Rotation: Set image rotation.
Smoked Dome Cover: This function is only for Pro Dome. If Pro Dome is equipped with a
Smoked Dome Cover, enable this function to display a normal image.
Local Display Video: Select NTSC or PAL for local display.
Keep Correct Aspect Ratio:With this option enabled, the camera will prevent the image
from distortion when resolution ratio is changed.
Zoom Limit: Set the Zoom Limit.
Note:
1. Smoked Dome Cover is only supported for Pro Dome and PTZ Dome cameras.
2. Smart IR Mode and IR LED Level are supported for cameras with IR LEDs.
3. White LED Level is only supported for PTZ Bullet cameras.
NVR User Manual | 3 - Local Operation | 151