Access The Answering System Remotely; Remote Access Commands - GE 28522AE1 User Manual

Answering system

Access the answering system remotely

1. Dial your phone number from any touch-tone telephone.
2. Once your answering system takes your call and you hear your outgoing
announcement, press the # key. The answering system will prompt you to
enter your security code.
3. Enter your security code using the numeric keypad on the touch-tone
telephone. The system will start playing messages after you hear a
confirmation tone.
NOTES:
1. If your answering system is off, you will not hear your outgoing announcement. The system will answer
your call after 10 rings and then ask you to enter your security code.
2. If you have entered an incorrect security code, an error tone will sound and the system will ask you to
re-enter the code.
3. If you have forgotten the security code, you will need to reset the system (refer to page 8). The
security code will be restored to its default setting as 0000 after system reset.

Remote access commands

Touch-tone
keys
1
2
3
6
7
8
9
A convenient wallet card, with instructions needed to operate your answering
system remotely, can be found on page 45.
Replay the current or previous message
Play messages
Skip to the next message
Delete the current message
Turn the answering system on
Stop message playback
Turn the answering system off
remote command
30