Remote Code For Remote Access; Access The Answering System Remotely; Remote Access Commands - GE 30542EE1 User Manual

Answering system

Remote code for remote access

Your answering system allows you to program a 3-digit remote code to get access to
the system through any touch-tone telephone. The default remote code is 123.
To change the remote code:
1. Press .
2. Press or
3. Press or
4. The handset screen displays the current remote code. Use the dial
key pad to enter a new 3-digit remote code and then press
confirm.

Access the answering system remotely

1. Dial your phone number from any touch-tone telephone.
2. Enter your remote code using the numeric keypad on the touch-tone telephone
when your answering system takes your call and you hear your outgoing
announcement.
3. The system will start playing the remote access menu if the remote code is
correctly entered.
NOTES:
1. If your answering system is off, you will not hear your outgoing announcement. The system will answer your
call after 10 rings and then ask you to enter your remote code.
2. Enter the code again if you have entered an incorrect remote code.

Remote access commands

Touch-
tone keys
1 Replay the current or previous message.
2 Play/stop messages.
3 Skip to the next message.
4 Turn the answering system on or off.
7 Listen to the main menu.
0 Delete the current message.
A convenient wallet card, with instructions needed to operate your answering system
remotely, can be found on page 41.
to select Answer System and then press
to select Remote Code and then press
Remote command
26
10:30 11/20
PM
.
Remote Code
Answer On/Off
.
11/20
10:30
PM
to
Remote Code
123