Oven Racks - GE Monogram ZDP304NPSS Owner's Manual

30″, 36″ and 48″ professional dual fuel ranges
Hide thumbs Also See for Monogram ZDP304NPSS:
Table of Contents

Advertisement

Available languages

Available languages

Full
extension
burns, place the racks in the correct position

oven racks

before turning on the oven.
The correct rack position depends on the
kind of food and the browning desired.
Remove
To remove a rack:
and
1. Make sure the rack is pushed all the way into
replace
oven racks
2. Grasp the rack by both its upper front rail and
3. Firmly holding onto both the upper and lower
18
CAUTION:
To avoid possible
the oven.
its lower front rail and lift straight up to unlock
the front rack locks from the rack supports.
Lift to unlock front
rack locks from
the rack support
Front rack lock
front rack rails, pull the rack forward and
remove it from the oven.
Upper
front rail
Oven Racks
The racks have a frame that locks into the
rack supports on both sides. Once the frame is
locked into place, always pull the rack out, by its
upper front rail, to its full extension stop position,
when placing or removing cookware.
To replace a rack:
1. Place the rear rack locks over and onto
the rack supports (five rack positions are
available including the top position).
Lower
front rail
Upper
front rail
2. Slide the rack all the way in until the
rear rack locks are secure on the rear rack
supports and press the front rack locks onto
the front rack supports.
Lower
front rail
3. Pull the rack all the way out to check that it is
properly engaged.
Professional Dual Fuel Range
Slide the rack all the way in
and push down to lock the
front rack locks onto the
front rack supports
Front rack
lock

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents