Connecting A Gas Dryer - GE Profile DPVH890EJ Owner's Manual And Installation Instructions

CONNECTING A GAS DRYER (skip for electric dryers)
TOOLS YOU WILL NEED
❒ 10" Adjustable
wrenches (2)
❒ 8" Pipe wrench
❒ Slip-joint pliers
MATERIALS YOU WILL NEED
❒ 4" dia. metal elbow
❒ Pipe compound
❒ Flexible gas line
connector
❒ Duct clamps (2) or
Spring clamps (2)
❒ Safety glasses
❒ 4" dia. metal duct
(recommended)
Installation Instructions
❒ Flat-blade screwdriver
❒ Level
❒ 4" dia., UL-listed flexible
metal duct (if needed)
❒ Gloves
❒ Soap solution for
leak detection
❒ Exhaust hood
❒ Duct tape
FOR YOUR SAFETY:
WARNING
Before beginning the installation, turn off
the circuit breaker(s) or remove the dryer's circuit
fuse(s) at the electrical box. Be sure the dryer cord
is unplugged from the wall.
Turn the dryer's gas shut-off valve in the supply
line to the OFF position.
Shut-off
Valve
Disconnect and discard old flexible gas connector
and ducting material.
18