Front Of The Switch; Network Ports - HP J4902A Installation And Getting Started Manual

Introducing the HP Procurve Switch 6108

Front of the Switch

Front of the Switch
Power
Self Test and
and Fault
Console
LEDs
port
Reset and Clear Mode LED View button
buttons and indicator LEDs

Network Ports

■
■
Dual-Personality Port Operation. By default, the RJ-45 connnectors are
enabled. If a mini-GBIC is installed in a slot, it is enabled and the associated
RJ-45 connector is disabled and cannot be used. If the mini-GBIC is removed,
the associated RJ-45 port is automatically re-enabled.
1-2
Fan Status
LEDs
10/100/1000Base-T RJ-45 ports*
* All 10/100/1000Base-T RJ-45 ports have the
IEEE 802.3ab "Auto MDI/MDIX" feature.
Six auto-sensing 10/100/1000Base-T RJ-45 ports.
All these ports have the IEEE 802.3ab "Auto MDI/MDI-X" feature, which
means that you can use either straight-through or crossover twisted-
pair cables to connect any network devices to the switch.
Two dual-personality ports. You can use either the 10/100/1000Base-T
RJ-45 connector, or install a supported HP Procurve mini-GBIC for fiber-
optic connections.
The RJ-45 connectors support the IEEE Auto MDI/MDI-X feature.
Link and Mode LEDs
HP Procurve Switch 6108
for switch ports
(1000Base-T* or mini-GBIC)
Dual-personality ports