Installation Procedures; Summary - HP J4902A Installation And Getting Started Manual

Multiport switch
Table of Contents

Advertisement

Installing the Switch 6108

Installation Procedures

Installation Procedures

Summary

Follow these easy steps to install your switch. The rest of this chapter provides
details on these steps.
1.
2.
3.
4.
5.
6.
7.
At this point, your switch is fully installed. See the rest of this chapter if you
need more detailed information on any of these installation steps.
2-2
Prepare the installation site (page 2-4). Make sure that the physical
environment into which you will be installing the switch is properly
prepared, including having the correct network cabling ready to connect
to the switch and having an appropriate location for the switch. Please see
page 2-3 for some installation precautions.
Install mini-GBICs (optional—page 2-5). The switch has two slots
for installing mini-GBICs. Depending on where you will install the switch,
it may be easier to install the mini-GBICs first. Note that the mini-GBICs
can be hot swapped—they can be installed or removed while the switch
is powered on.
Verify that the switch passes self test (page 2-7). This is a simple
process of plugging the switch into a power source and observing that the
LEDs on the switch's front panel indicate correct switch operation.
Mount the switch (page 2-9). The Switch 6108 can be mounted in a
19-inch telco rack, in an equipment cabinet, on a wall, or on a horizontal
surface.
Connect power to the switch (page 2-14). Once the switch is
mounted, plug it in to the nearby main power source.
Connect the network devices (page 2-15). Using the appropriate
network cables, connect the network devices to the switch ports.
Connect a console to the switch (page 2-16). You may wish to modify
the switch's configuration, for example, to configure an IP address so it
can be managed using a web browser, from an SNMP network manage-
ment station, or through a Telnet session. Configuration changes can be
made easily by using the included console cable to connect a PC to the
switch's console port.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 6108

Table of Contents