Sunnydaze Decor GSI-6121 Manual

RAINFALL RIDGE SLATE TABLETOP FOUNTAIN
Review all assembly and care information before using this product. Save this manual for future reference.
Select a smooth, level surface to place the fountain. Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
ASSEMBLY
1. Insert the finger light on Pump (B) into the opening on the underside of Fountain Body (C).
2. Firmly connect the pump to the water tube on bottom of the fountain body.
3. Ensuring the pump power cord runs over the groove on the back of the basin, place the fountain body onto
Basin (A). Connect AC Adapter (D) to the pump power cord.
4. Fill the fountain with enough water to keep the pump fully submerged during operation.
5. Plug the power cord directly into a properly grounded GFCI outlet.
6. If necessary, adjust water flow rate using the flow control on the front of the pump. Once water flow is satisfactory,
rinse Decorative Stones (E) with clean water and gently arrange them on the bottom of the fountain body.
NOTE: When first plugged in, there may be air trapped in the pump. It may take several moments for trapped air to escape, allowing water to flow.
SPQ1361
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
GSI-6121
05/2024
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
No. Parts
A Basin
Electric Submersible Pump
B
w/ LED Finger Light
C
Fountain Body
D AC Adapter
E Decorative Stones
IMPORTANT NOTES:
Use care when unpacking and assembling this fountain. Before
assembly, check the basin for leaks. The sealant used to join the slate
pieces can crack if the fountain is not handled with care. Simply add
water and wait to see if water begins to leak. If a leak is discovered,
contact an expert at your local hardware store for an appropriate
sealant and carefully follow the sealant manufacturer's instructions
to seal the leak.
The water tubing is built into the fountain body. Take care when
handling the water tube; detaching the water tube will damage the
fountain and void the product warranty.
The light and light cable are rated for contact with water. Use care
when handling the light, dropping the light may cause the light to burn
out prematurely.
Slate is a natural product; the colors and texture of each piece are
unique, no two fountains will look the same. Each piece is cut from
a large slab of slate. Spalling (flaking) may occur during production,
naturally over time, and/or if slate is dropped. Variations in the
natural characteristics of slate are not a cause for return.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS,
SEALANTS OR CLEANING PRODUCTS.
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Qty.
1 PK
Page 1 / 2
1
1
1
1