Table of Contents
Advertisement
XG0448 Hardware Guide
2.5
Time Setting
Make sure to set up the time before you do other settings of the switch. The time is not set at the initial timing of purchase.
Please refer below command for setting up time manually using console or telnet.
Command
When setting time and date to be "Jan 1, 2011 12:30:00am" type in command
# date 2011/01/01.12:30:00
XG0448# configure
XG0448(config)# time zone -0500
XG0448(config)# commit
XG0448(config)# save
XG0448(config)# exit
XG0448# date 2011/01/01.12:30:00
Switch to Configuration mode.
When setting time zone to be "-0500".
Apply the configuration.
Save the configuration.
Switch to Operation mode.
Set time and date to be "Jan 1, 2011 12:30:00am".
45
Chapter 2 Installation
Time Setting
Advertisement
Table of Contents
